Brickalike

Your photos never leave your phone

Scan anything.
Get it back in bricks.

Turn any object into a brick model. Scan it with your phone or import a 3D file, preview it free, then 3D print it or build it from a parts list and step-by-step build instructions.

Build one free See examples
  • No account
  • Runs in your browser
  • Pay €12 once, only to download
A 3D scan of a rubber duck
Your scanPhone scan or 3D file
The same duck turned into a brick model on a base plate
Your brick model392 bricks, 17 layers

Try it now, free

Build one in three steps

1Choose what to scan

2Preview it and tweak it

Drag to rotate · pinch to zoom

Nothing loaded yet

Pick a sample above to see what comes out
—bricks
—size
—colours
—studs

Adjust the model

—

Built from
Colours

Drops the bricks nobody can see. Much cheaper and faster.

3Get your files

Print it in one piece

One STL, one print, no assembly. Looks brick-built, isn't separable bricks.

Print size
Print tips

One STL, so it prints in whatever single colour is loaded — the colours on screen are the buy-list's, not this file's. A multi-material unit can paint it, but you'd have to assign them in your slicer.

Studs are only modelled where they're visible. The file arrives upright and sitting on the bed, in millimetres — print at 0.2mm layers. Stepped sides usually print without supports; anything with a big overhang still needs them.

Print the actual bricks

Real hollow bricks with studs and clutch tubes, then click them together.

Honest warning: brick clutch needs about 0.1mm accuracy. On a typical FDM printer these will come out either loose or welded together, and you'd be printing hundreds of them. Resin gets closer.

Buy the real bricks

Parts list plus a layer-by-layer building manual. No printer needed.

Price is a rough estimate for used parts and excludes postage. Colour IDs in the BrickLink file are unverified — check the list looks right before you pay.

Examples

Same engine, any object

Each pair is a real render from Brickalike: the sample 3D model on the left, the brick model it built on the right.

How it works

From object to model in minutes

  1. 1

    Scan or load an object

    Use your phone camera, import a 3D scan, or try a sample. Everything is built right in your browser.

  2. 2

    Preview it for free

    Spin the model, change the detail, and see the exact brick count and parts list before you pay anything.

  3. 3

    Unlock your files

    Pay once, then download the print file, the parts lists and the building manual.

Included

A building manual you can actually use

Every model comes with a printable guide: a cover, a full parts list, and one numbered page per layer with a 3D picture, a top-down plan and the exact bricks to add. Save it as a PDF or print it.

  • 3D picture of the model after every step
  • Layer plan seen from above
  • Parts list to tick off as you gather bricks
A page from a Brickalike building manual: step 11 of 17 showing the rubber duck model in 3D, a layer plan and a list of bricks to add

Price

€12one-off, no subscription

Scanning, previewing and the brick count are always free. Secure checkout is handled by Stripe. The price is the all-in price, VAT included where it applies.

Start with a free preview

What you get

  • One-piece STL, print-ready at the size you choose
  • Printable brick kit and print list
  • Parts list (CSV) and BrickLink wanted list
  • Printable building manual with 3D step pictures
  • One unlock code, works on up to 3 of your browsers or devices

FAQ

Questions

Are my photos uploaded anywhere?

Not for camera scans. Your photos stay on your device and the model is built in your browser. The one exception is the optional "From a photo" route: it sends that single photo to an AI service (Tripo or Meshy) using your own free key, passing through a relay that does not store it.

Do I need a 3D printer?

No. The parts list and the building manual are for building with real bricks. The STL files are for people who do have a printer.

Will it fit real bricks?

The parts list uses standard brick sizes and colours, so you can buy the pieces. The printable brick kit is made to standard stud spacing, but home printers vary: bricks can come out loose or too tight, and resin printers get closest.

Is this an official brick-maker product?

No. Brickalike is independent and is not affiliated with, endorsed by or connected to any brick or toy manufacturer. "Brick-compatible" means it uses standard stud spacing and common brick sizes.

What can I import?

3D scans as GLB, glTF, OBJ, STL or zipped OBJ from apps like Scaniverse or Polycam. You can also scan with your phone camera right here, or start from a sample.

What if something goes wrong?

Email [email protected] within 14 days of buying and we will fix the problem or refund you. This doesn't affect your legal rights.

How many devices can I use my unlock code on?

Up to three browsers or devices. Your code never expires, unless the purchase is refunded.